Nickel and Nickel Alloys
Alloys
|
UNS
|
EN
|
Tube
|
Bar
|
Plate
|
Alloy 200
|
N02200
|
2.4066
|
B161/163
|
B160
|
B162
|
Alloy 400
|
N04400
|
2.4360
|
B163/165
|
B164
|
B127
|
Alloy K-500
|
N05500
|
2.4375
|
|
B865
|
|
Alloy 600
|
N06600
|
2.4816
|
B163/167/516/517
|
B166
|
B168
|
Alloy 601
|
N06601
|
2.4851
|
B167
|
B166
|
B168
|
Alloy 625
|
N06625
|
2.4856
|
B444/704/705
|
B446
|
B443
|
Alloy 718
|
N07718
|
2.4668
|
|
B637
|
B670
|
Alloy 800
|
N08800
|
1.4558
|
B163/B407/B515
|
B408
|
B409/B906
|
Alloy 800H
|
N08810
|
1.4958
|
B163/407/514/515
|
B408
|
B409
|
Alloy 800HT
|
N08811
|
1.4959
|
B163/407/514/515
|
B408
|
B409
|
Alloy 825
|
N08825
|
2.4858
|
B163/423
|
B425
|
B424
|
Alloy C276
|
N10276
|
2.4819
|
B619/622/626
|
B574
|
B575
|
Alloy 20
|
N08020
|
2.4660
|
B464
|
B473
|
B463
|
Alloy 59
|
N06059
|
2.4605
|
B619/622/626
|
B574
|
B575
|
High Performance Alloy
High temperature alloy is mainly used in the manufacture of aircraft, ships and industrial gas turbine turbine blades, guide vane, combustion chamber and turbine disc, high-pressure compressor plate high temperature parts. Also used in the manufacture of aerospace aircraft, rocket engines, nuclear reactors, petroleum chemical industry equipment and coal conversion and other energy conversion device.
INCONEL 600 (UNS N06600)
A general engineering Ni-Cr-Fe alloy with good high temperature strength and oxidation resistance. Its approved under the Boile r and Pressure Vessel Code of the ASME. It is approved under Section I (Power Boilers), Section III (Nuclear Vessels ), and Section VIII (Pressure Vessels). Allowable design stresses are found in Section II, Part D. Section I coverage is provided by Code Case 1827.
Chemical composition
Ni: 72.0 min S: 0.015 max Cr:14.0-17.0 Si: 0.5 max
Fe: 6.0-10.0 Cu: 0.5 max C: 0.15 max Mn : 1.0 max
Specification
Bar, Rod, Wire: ASTM B 166, SAE AMS 5665, 5687, MIL-DTL-23229
Forging: ASTM B 564, ISO 9725, DIN 17754
Pipe & Tube: ASTM B 163, 516, 517, 751, 775, 829, SAE/AMS 5580, ASME Code Cases 1827 Plate, Sheet, Strip: ASTM B 168, 906, SAE/AMS 5540, MIL-DTL-23228, ASME Code Cases 1827
INCONEL 601 (UNS N06601)
A Ni-Cr-Fe alloy with outstanding high temperature strength and oxidation resistance. It is approved as a material of construct ion by the ASME Boiler and Pressure Vessel Code. Allowable stresses and rules for Section 1 construction up to 900°F an d Section VIII, Division 1 construction up to 1650°F are contained in the latest revision of ASME Code Cases 1500.
Chemical composition
Ni: 58.0-63.0 Mn: 1.0 max
Cr: 21.0-25.0 Si: 0.5 max
Al : 1.0-1.7 S: 0.015 max
Fe: Remainder Cu: 1.0 max C: 0.1 max
Specification
Bar, Rod, Wire: ASTM B 166 , DIN 17752, 17753, ISO 9723 , 9724
Forging: DIN 17754, ISO 9725
Pipe & Tube: ASTM B 167, 751, 775, 829
Plate, Sheet, Strip: ASTM B 168
INCONEL 625 (UNS N06625)
A Ni-Cr-Mo alloy with good strength at up to 1500°F (815°C) and excellent resistance to a wide variety of corrosive media.
Chemical composition
Ni: 58.0 min C: 0.1 max Ti: 0.4 max
Cr: 20.0-23.0 Mn: 0.5 max P: 0.015 max
Mo: 8 .0 - 10.0 Si: 0 .5 max Co: 1 .0 max
Nb: 3.15-4.15 S: 0.015 max Fe: 5.0 max Al: 0.4 max
Specification
Bar, Rod, Wire: ASTM B 446, SAE AMS 5665, 5837,ASME Code Case 1935
Forging: ASTM B 564, SAE AMS 5665,ASME Code Case 1935
Pipe & Tube: ASTM B 444 704 705 751 775 829 SAE/AMS 5581
Plate, Sheet, Strip: ASTM B 443, SAE/AMS 5599 & 5869 & MAM 5599
INCONEL 718 (UNS N07718)
An age harden able Ni-Fe-Cr alloy, certainly among the most versatile, combining high strength at up to 1300°F (700°C) with corrosion resistance and excellent Weld ability.
Chemical composition
Ni: 50.0-55.0 Ti: 0.65-1.15 Si: 0.35 max
Cr: 17.0-21.0 Al: 0.2-0.8 P: 0.015 max
Fe: Remainder Co: 1.0 max S: 0.015 max
Nb: 4.75-5.50 C: 0.08 max B: 0.006 max
Mo: 2.8-3.3 Mn: 0.35 max Cu: 0.3 max
Specification
Bar, Rod, Wire: ASTM B 637, SAE AMS 5662, 5663, 5664, 5832, 5914, 5962, NACE MR-01-75
Forging: SAE AMS 5662, 5596, 5663, 5597, NACE MR-01-75
Pipe & Tube: SAE AMS 5589, 5590, ASME Code Case N-253, DIN 17751, NACE MR-01-75
Plate, Sheet, Strip: ASTM B 670, 906, SAE AMS 5596, 5597, 5950, NACE MR-01-75
Other: ASME Code Case N-62, ASME Code Case N-208, DIN 17744, NACE MR-01-75
INCONEL X-750 (UNS N07750)
An age hardenable Ni-Cr alloy with high tensile and creep rupture properties up to 1300°F (700°C).
Chemical composition
Ni: 70.0 min Nb: 0.7-1.2 Cu: 0.5 max Cr: 14.0-17.0 C: 0.08 max Co: 1.0 max
Fe: 5 .0-9.0 Mn: 1 .0 max Ti: 2.25-2.75 Si: 0.5 max Al: 0.4-1.0 S: 0.01 max
Specification
Bar, Rod, Wire: ASTM B 637, SAE AMS 5667-5671, 5747, 5698, 5699, NACE MR-01-75
Forging: ASTM B 637, SAE AMS 5667-5671, 5747, 5698, 5699, NACE MR-01-75
Plate Sheet Strip: ISO 6208 SAE AMS 5542 5598
INCOLOY A-286 (UNS S66286)
An age hardenable Fe-Ni-Cr alloy with good strength and oxidation resistance up to 1300°F (700°C).
Chemical composition
Ni: 24.0-27.0 V: 0.1-0.5 S: 0.03 max
Cr: 13.5-16.0 C: 0.08 max B: 0.001-0.01
Fe: Remainder Mn: 2.0 max Ti: 1.90-2.35
Si: 1.0 max Mo: 1.0-1.5 Al: 0.35 max
Specification
Bar, Rod, Wire: ASTM A 638, SAE AMS 5726, SAE AM S 5731, 5732, 5734, 5737, 5895
Forging: ASTM A 638, SAE AMS 5726
Pipe & Tube: SAE AMS 5731, 5732, 5734, 5737, 5895
Plate, Sheet, Strip: SAE AMS 5525, 5858
Other: ASTM A 453, SAE AMS 7235
NIMONIC 75 (UNS N06075)
Ni-Cr alloy with good high temperature strength and outstanding oxidation resistance. Used in engine applications.
Chemical composition
Ni: Remainder Si: 1 .0 max
Cr: 18-21 Ti: 0.2-0.6
Cu: 0.5 max C: 0.08-0.15
Fe: 5.0 max Mn: 1.0 max
Specification
Bar, Rod, Wire: BS HR 5 BS HR 504 DIN 17752 AECMA PrEN2306 PrEN2307 PrEN2402
Forging: BS HR 5
Pipe & Tube: BS HR 403, DIN 17751, AECMA PrEN2294, ISO 6207
Plate, Sheet, Strip: BS HR 203, DIN 17750, AECMA PrEN2293, PrEN2302, PrEN2411, ISO 6208
Other: DIN 17742, AECMA PrEN2308
NIMONIC 80A (UNS N07080)
An age hard-enable creep resistant t alloy for service at temperatures up to 1500°F (815°C). Used for gas turbine components (blades, rings and discs), bolts, nuclear boiler tube supports, die casting inserts and cores, and for automobile exhaust valves.
Chemical composition
Ni: Remainder Si: 1 .0 max B: 0 .008max Cr: 18.0-21.0 Cu: 0.2 max Zr: 0.15 max
Ti: 1.8-2.7 Fe: 3.0 max S: 0.015 max Al: 1.0-1.8 Mn: 1.0 max C: 0.1 max Co: 2.0 max
Specification
Bar, Rod, Wire: ASTM B 637, BS 3076 & HR 1, AECMA PrEn 2188, 2189, 2190, 2396, 2397
Forging: ASTM B 637
Pipe & Tube: BS HR 401
Plate, Sheet, Strip: BS HR 201, AECMA PrEn 2191
NIMONIC 90 (UNS N07090)
An age harden able super-alloy for service at up to 1700°F (925°C). used for turbine blades, discs, forgings, ring sections, hot-working tools.
Chemical composition
Ni: Remainder C: 0.13 max Zr: 0.15 max Cr: 18-21 Mn: 1.0 max
Pb: 0.002 max Co: 15-21 Si: 1.0 max B: 0.02 max Al: 1.0-2.0
S: 0.015 max Cu: 0.2 max Ti: 2.0-3.0 Fe: 1.5 max
Specification
Bar, Rod, Wire: BS HR2, HR501-03, SAE AM S 5829, AECMA PrEN 2295-97, 2400-01, 2669-70
Forging: BS HR2
Pipe & Tube: BS HR402, AECMA PrEn 2299
Plate, Sheet, Strip: BS HR202, AECMA PrEN 2298
Corrosion-Resistant Alloy
Metal materials in the corrosive medium has the ability of resistance to medium erosion, corrosion resistance. Alloying method is adopted for corrosion resistant alloy: improving the thermodynamic stability of the metal or alloy; Joining is easy passivation alloy elements; Join the prompt production alloy surface density corrosion products of protective film of the alloying elements. Used in Marine and chemical processing equipment, pump, valve parts, containers, etc.
NICKEL 200 (UNS N02200)
Commercially pure wrought nickel with good mechanical properties and aqueous corrosion resistance. Used for chemical and process plants such as caustic soda and synthetic fiber production, and for food handling.
Chemical composition
Ni: 99.0 min Si: 0.35 max Cu: 0.25 max S: 0.01 max
Fe: 0.40 max Mn: 0.35 max C: 0.15 max
Specification
Bar, Rod, Wire: ASTM B 160, ISO 9723, DIN 17752, ISO 9724, DIN 17753
Forging: ASTM B 564, ISO 9725, DIN 17754
Pipe & Tube: ASTM B 161, 163, 725, 730, 751, 775, 829
Plate, Sheet, Strip: ASTM B 162 ISO 6208 DIN 17750
Other: ASTM B 366
NICKEL 201 (UNS N02201)
Similar to Nickel 200 but with low carbon controlled to prevent inter granular embrittlement at above 600°F (315°C). Used for ch emical and process plants.
Chemical composition
Ni: 99.0 min Si: 0.02 max Cu: 0.25 max S: 0.01 max
Fe: 0.40 max Mn: 0.35 max C: 0.15 max
Specification
Bar, Rod, Wire: ASTM B 160, ISO 9723, DIN 17752, ISO 9724, DIN 17753
Forging: ASTM B 564, ISO 9725, DIN 17754
Pipe & Tube: ASTM B 161, 163, 725, 730, 751, 775, 829
Plate, Sheet, Strip: ASTM B 162, ISO 6208, DIN 17750, SAE AMS 5553
Other: ASTM B 366
MONEL 400 (UNS N04400)
A Ni-Cu alloy with high strength and excellent resistance to a range of media including seawater, dilute hydrofluoric and sulfuric acids, and alkalies. Used in
marine and offshore engineering, salt production, feed water heaters, and chemical and hydrocarbon processing.
Chemical composition
Ni: 63.0 min Si: 0.5 max Cu: 28.0-34.0 S: 0.024 max
Fe: 2.5 max Mn: 2.0 max C: 0.3 max
Specification
Bar, Rod, Wire: ASTM B 164, SAE AMS 4675 Forging : ASTM B 564, SAE AMS 4675
Pipe & Tube: ASTM B 163, 165, 725, 730, 751, 775, 829, SAE AMS 4574
Plate, Sheet , Strip: ASTM B 127, SAE AMS 4544
Other: ASTM B 366
MONEL K-500 (UNS N05500)
Similar to MONEL alloy 400 but age-harden able for higher strength and hardness. Used for pump shafts, oil well tools, doctor blades, springs, fasteners and marine propeller shafts.
Chemical composition
Ni: 63.0 min C: 0.25 max Cu: 27.0-33.0 Mn: 1.5 max
Al: 2.30-3.15 S: 0.01 max Ti: 0 .35-0.85 Si: 0.5 max Fe: 2.0 max
Specification
Bar, Rod, Wire: ASTM B 865, SAE AMS 4676, ASME Code Case 1192
Forging: ISO 9725
Pipe & Tube: BS3074NA18, DIN 17751
Plate, Sheet, Strip: BS3072NA18, BS3073NA18, DIN 17750, ISO 6208
INCONEL 690 (UNS N06690)
An alloy with excellent high temperature corrosion - resistance for applications including nuclear steam generators, petrochemical processing, coal gasification, and sulfuric, nitric and nitric/hydrofluoric acid processing.
Chemical composition
Ni: 58.0 min S: 0.015 max Cr: 27.0-31.0 Si: 0.5 max
Fe: 7.0-11.0 Cu: 0.5 max C: 0.05 max Mn: 0.5 max
Specification
Bar, Rod, Wire: ASTM B 166, ASME Code Case N-525, ISO 9723, MIL-DTL-24801
Forging: ASTM B 564
Pipe & Tube: ASTM B 163, 167, 829, ASME Code Cases 2083, N-20, N-525, ISO 6207
Plate, Sheet, Strip: ASTM B 168, 906, ASME N-525, ISO 6208, MIL-DTL-24802
INCOLOY 800 (UNS N08800)
An alloy with strength and corrosion-resistance for use in chem ical, petrochemical and food proc essing, for nuclear engineering and for the sheathing of electrical heating elements. For use, generally, at temperatures below 1200°F (650°C).
Chemical composition
Ni : 30.0-35.0 S: 2 Fe: 39.5 min Si: 1.0 max Cr: 19.0-23.0
Cu: 0.75 max C: 0.1 max Al : 0.15-0.60 Mn: 1.5 max Ti: 0.15-0.60
Available form and specification
Bar, Rod, Wire: ASTM B 408, ASME Code Case1325, SAE AMS 5766, NACE MR-01-75
Forging: ASTM B 564, ASME Code Case 1949, NA CE MR-01-75, ASME Code Case 1325
Pipe & Tube: ASTM B 163, 407, 514, 515, 751, 775, 829, NACE MR-01-75, ASME N-20
Plate, Sheet, Strip: ASTM A240, 480, ASTM B 409, 906, SA E AMS 5871, NACE MR-01-75
Other: ASTM B 366, NACE MR-01-75, ASME Code Case 1325
INCOLOY 800H (UNS N08810)
An alloy with strength and corrosion-resistance for use in chemical, petrochemical and food processing, for nuclear engineering and for the sheathing of electrical heating elements. For use, generally, at temperatures below 1200°F (650°C).
Chemical composition
Ni: 30.0-35.0 Ti: 0.15-0.60 Fe: 39.5 min Al+Ti: 0.85-1.2
Cr: 19.0-23.0 C: 0.05-0.10 Al: 0.15-0.60
Available form and specification
Bar, Rod, Wire: ASTM B 408, ASME Code Case 1325, SAE AMS 5766, NACE MR-01-75
Forging: ASTM B 564, ASME Code Case 1949, NA CE MR-01-75, ASME Code Case 1325
Pipe & Tube: ASTM B 163, 407, 514, 515, 751, 775, 829, NACE MR-01-75, ASME N-20
Plate, Sheet, Strip: ASTM A240, 480, ASTM B 409, 906, SAE AMS 5871, NACE MR-01-75
Other: ASTM B 366, NACE MR-01-75, ASME Code Case 1325
INCOLOY 800HT (UNS N08811)
An alloy with strength and corrosion-resistance for use in chemical, petrochemical and food processing, for nuclear engineering and for the sheathing of electrical heating elements For use generally at temperatures below 1200 °F (650°C)
Chemical composition
Ni:30.0-35.0 Ti: 0.25-0.60 Fe:39.5 min Al+Ti: 0.85-1.2
Cr:19.0-23.0 C:0.06-0.10 Al: 0.25-0.60
Available form and specification
Bar, Rod, Wire: ASTM B 408, ASME Code Case 1325, SAE AMS 5766, NACE MR-01-75
Forging: ASTM B 564, ASME Code Case 1949, NA CE MR-01-75, ASME Code Case 1325
Pipe & Tube: ASTM B 163, 407, 514, 515, 751, 775, 829, NACE MR-01-75, ASME N-20
Plate, Sheet, Strip: AS TM A240, 480, ASTM B 409, 906, SAE AMS 5871, NACE MR-01-75
Other: ASTM B 366, NACE MR-01-75, ASME Code Case 1325
INCOLOY 825 (UNS N08825)
A Ni-Fe-Cr-Mo Ti-stabilized alloy with excelle nt resistance to sulfuric and phosphoric acids. Resistant to reducing and oxidizi ng acids, pitting, stress-corrosion cracking and intergranular corrosion, it is used in chemical and petrochemical processing , oil and gas extraction, pollution control, waste processing and pickling applications.
Chemical composition
Ni: 38.0-46.0 Ti: 0.6-1.2 Al: 0.2 max Fe: 22.0 min C: 0.05 max Cr: 19.5-23.5
Mn: 1.0 max Mo: 2.5-3.5 S: 0.03 max Cu: 1.5-3.0 Si: 0.5 max
Available form and specification
Bar, Rod, Wire: ASTM B 425, AS ME Code Case N-572, NACE MR-01-75
Forging: ASTM B 564
Pipe & Tube: ASTM B 163, 423, 704, 705, 751, 775, 829, NACE MR-01-75
Plate, Sheet, Strip: ASTM B 424, 906, NACE MR-01-75
HASTELLOY C-276 (UNS N10276)
Offers resistance to reducing and mildly oxidizing environments, and is resistant to localized attack and to stress-corrosion cracking . Used widely in the chemical and process industries and for aggressive environments in the pollution control industry.
Chemical composition
Ni: 57.0 min Fe: 5 Co: 2.5 max Si: 0.08 max Cr: 16 Mn: 1.0 max
Mo: 16 C: 0.01 max W: 4 V: 0.35 max
Available form and specification
Bar, Rod, Wire: ASTM B 574, 472
Forging: ASTM B 564, 462
Pipe & Tube: ASTM B 619, 622,626,751,775,829
Plate, Sheet, Strip: ASTM B 575